I Built My Own Apple HomeView Alternative in 2 Hours

You’ve seen it in movies. The fancy house with a tablet that runs everything. Lights. Cameras. Music. All from one screen.

Apple just announced HomeView, which is basically that. It looks great. But I can’t buy it here in Dubai. And it really only works with Apple Home stuff.

So I built my own Apple HomeView alternative. A 13-inch smart home dashboard I can carry around the house and set up however I want. It took me about two hours. I didn’t write a single line of code.

I’d never done anything like this before. The tablet cost under $200 and Claude did all the boring parts. Below is exactly how I did it, with every prompt I used. Copy them and build your own.

Why not just buy Apple HomeView?

HomeView is $299 with a 7-inch screen. It’s a nice device. It just wasn’t right for me.

  • I can’t get it. It’s only launching in a few countries, and Dubai isn’t one of them.
  • It’s built for Apple Home. I wanted to use any smart device from any brand.
  • 7 inches is small. I wanted something I can read from across the room.
  • It stays in one place. A tablet goes wherever I need it. Hallway, office, kitchen.
  • I wanted it to look exactly my way. Every tile, every colour.

I’d seen people on X build crazy detailed dashboards. Some people even hack cheap smart photo frames from Amazon. Cool ideas. But I wanted something bigger, faster and simpler.

What you need to build your own Apple HomeView alternative

Three things. No coding.

  1. An Android tablet. Any one that fits your budget. Mine is a 13-inch Honor tablet that cost under $200.
  2. Home Assistant. Free software that runs your smart home. I’ll explain it below.
  3. Claude. ChatGPT works too. This is the bit that does the hard work for you.

You’ll also want a stand for the tablet and a free app called Kiosk Satellite. More on that later.

How I built it in 2 hours, step by step

Step 1: Pick a tablet

I went with a 13-inch Android tablet from Honor. The Pad X9B Max to be specific. The screen is big, sharp and bright. It’s 120Hz too, so swiping feels smooth.

The important bit is that it’s LCD, not OLED. This screen stays on all day showing the same thing. On an OLED screen that can leave a permanent ghost image, called burn-in. LCD doesn’t have that problem.

Why not an iPad? You can’t really change how an iPad works. Android lets you do pretty much anything, like replacing the home screen with your dashboard.

You don’t need my exact tablet. Any Android tablet works. Just get an LCD one if it’s going to stay on.

Step 2: Set up Home Assistant

Home Assistant is free software that runs your smart home. Think Apple Home, Google Home or Alexa. The difference is it works with almost any smart device from almost any brand. If something doesn’t work with it yet, someone online has probably found a fix.

It needs something to run on that’s always switched on. I bought a Home Assistant Green, a small box made just for this. You plug it into your router and you’re good to go. You can also use a Raspberry Pi, a NAS, an old PC or a Mac mini.

Once it’s running and your devices are added, do two quick things:

  • Make a user just for the tablet. I called mine Hallway and turned admin off. That way nobody walking past can mess with your settings.
  • Install HACS, then Browser Mod. HACS is like an app store for Home Assistant add-ons. From it, install Browser Mod, which lets your dashboard show pop-ups on the tablet.

If any of this feels confusing, ask Claude to walk you through it. That’s what I did.

Step 3: Connect Claude to Home Assistant

This is where the magic happens.

The worst part of any smart home is setting it up. Digging through menus. Building automations by hand. Most people can’t be bothered, and honestly neither can I.

Once Claude is connected to Home Assistant, it can see all your devices and make changes for you. You just tell it what you want in plain English. It always asks before it changes anything.

Here’s how to connect them:

  1. In Home Assistant, go to Settings, then Devices & services, and add the Model Context Protocol Serverintegration.
  2. Go to Settings, then System, then AI, and copy your server link.
  3. In Claude, go to Connectors and add a custom connector called Home Assistant. Paste the link, then sign in with your main Home Assistant account (not the tablet one).

One thing to know. Claude connects over the internet, so your Home Assistant needs to be reachable from outside your home. Home Assistant Cloud is one easy way to do that, but it’s a paid add-on. The official guide covers the other options.

Then I told Claude which tablet I’d bought. It wrote me a full plan and told me which steps I had to do myself. Whenever I got stuck, I told it what wasn’t working and it gave me the fix.

My first prompt didn’t build anything. It just checked what I already had. Copy it if you like:

Look at my Home Assistant and list what a hallway tablet dashboard could show: light groups and individual lights (flag any that are unavailable), scenes, weather entities, media players (Spotify, Sonos), cameras and any temperature, door or air-quality sensors. Don't change anything. Tell me what's missing for a dashboard with a clock, weather, lights and music.

Step 4: Turn the tablet into a dashboard

Claude suggested a few apps. I went with Kiosk Satellite. It’s free.

It locks the tablet into kiosk mode. That means it only shows your Home Assistant dashboard. No home screen, no notifications, nothing else. To get out, you need a PIN. My favourite part is you can change every setting from your laptop’s browser, as long as you’re on the same Wi-Fi.

One problem you’ll probably hit. Kiosk Satellite isn’t on the Play Store. You download the app from kiosksatellite.com/download and install it yourself. Google Play Protect kept blocking it. Play Protect is a security feature that stops apps from outside the Play Store. I wasted way too long trying to get around it. Then I just asked Claude. The fix:

  1. Open the Play Store app.
  2. Tap your profile icon in the top right.
  3. Go to Play Protect, open its settings and turn off app scanning.

It’s hidden on purpose. Google doesn’t want people installing dodgy apps. Only do this for apps you trust, and turn it back on when you’re done.

Once it was installed, the app walked me through connecting it to Home Assistant. That took a couple of minutes.

A few settings make a big difference:

  • Turn off the tablet’s screen lock. The kiosk PIN protects it instead.
  • Stop Android closing the app. Set the app’s battery use to unrestricted. Loads of Android tablets close apps in the background to save battery.
  • Turn on Act as home screen, Kiosk mode and Keep screen on in Kiosk Satellite. I also set a screensaver after about 3 minutes that wakes up when you walk past.
  • Turn on Remote Administration. If you ever forget your PIN, you can reset it from a browser.

Stuck on a setting? Tell Claude your tablet model and ask it to walk you through the exact menus, one step at a time.

Step 5: Let Claude build the dashboard (no coding)

With the setup done, I let Claude rip.

I described the screen I wanted and Claude built the whole thing from scratch. That’s why it doesn’t look like a normal Home Assistant dashboard.

Here’s my exact prompt. You don’t need to understand all of it. Paste it into Claude and swap anything in <angle brackets> for your own stuff, like your tablet’s screen size and the names of your lights.

Build me a custom Home Assistant Lovelace card (one JavaScript file, no build step, no external libraries) that renders the whole screen of a wall tablet in landscape, designed for <your screen resolution> and scaled to fit.

Look:
- Light grey page background, white rounded tiles with a very subtle shadow, Inter font, fast subtle animations on tap and open.
- Auto dark mode when the sun is below the horizon (sun.sun), with an option for always on or off.

Layout:
- Clock tile: a large Braun-style analog clock with numbered hour indices, minute ticks and a yellow second hand. Beside it, the weekday in yellow and the month in grey on one line, and a big day number under them.
- Weather tile for <weather entity>, always in Celsius, with a background that matches the condition (sun, cloud, rain, night). Tapping it opens a modal with today's stats, the next 24 hours and the week.
- Light tiles for <your lights or groups> that toggle on tap and show on/off state.

Behaviour:
- Go full screen (hide Home Assistant's header and sidebar) when the user isn't an admin or the URL has ?kiosk; ?edit turns that off so I can still edit.
- The Android back button closes any open popup, then returns to the home screen.

Create a new dashboard called Hallway with one panel view holding this card, add the card file as a dashboard resource, and make it the dashboard the Hallway user sees. Then tell me the URL to put in Kiosk Satellite.

Claude gives you a link at the end. Paste it into Kiosk Satellite and your dashboard appears on the tablet.

Then I tweaked it with short follow-ups while looking at the tablet. One change at a time. Like this:

On the tablet: make the clock bigger, make the hour numbers white in dark mode and the other minute ticks light grey, and give the clock face the same colour as the tile. Send me a screenshot preview before you save it.

That’s it. Plain English. No code.

I kept the main screen simple on purpose. Just what matters to me. I can always add more later.

The clock is a classic analog face inspired by Braun, and the whole screen switches to dark mode at sunset. Tap the weather and you get a bigger view with the next 24 hours and the week. I’ve got Dubai and London set up. The background even matches the weather. If it’s raining, it shows rain. At night it goes dark.

The cameras take a few seconds to load. That’s my cameras, not Home Assistant. I need faster ones. Below them I can switch my lights on and off.

Getting to this point took about two hours. That’s wild. Without Claude I honestly think I would have given up. Now I know the steps, I could probably do it again in 30 minutes. The longest part is just waiting for Claude to finish.

Making it feel like Apple HomeView

The next day I got a bit carried away. I asked Claude for extra screens I can swipe between, like on Apple’s version. Here’s the prompt:

Add swipe screens to the hallway card, beside the home screen, swipe only with no page dots. Keep swiping smooth at 120 Hz (use transforms and avoid heavy blur during the swipe).

1. Music: Spotify only (<your media_player.spotify entity>). Spotify logo above the album art, the art blurred and darkened as the background, text colour that adapts to the art, plain play/pause/skip icons and a progress bar.
2. Minimal clock: a huge analog clock with three thin hands, a yellow second hand and 12 faint hour ticks, nothing else.
3. Widgets: Apple liquid-glass style tiles on a muted, low-saturation steel-grey background, in a 4x3 grid that fills the screen. Include a clock, a lights all on/off toggle for <your lights>, and tiles for <temperature sensor, door lock, blinds, alarm, a scene...>. Use demo tiles for anything I don't have yet.

The back button should go back to the home screen from any of these.

Here’s what I ended up with.

Spotify. It shows what’s playing with the album art. I can pause and skip. The background changes colour with every album. It looks so clean.

A minimal clock. Just the time. Nothing else.

A liquid glass control screen. My take on HomeView’s controls. Is it as nice as Apple’s? No. But it took one prompt. With a bit more work it could be a lot better.

The crazy part is it all works. Everything is live and connected to my real stuff.

The doorbell trick

This might be my favourite bit. When someone rings the doorbell or the camera spots movement, the video pops up full screen for 20 seconds. No more wondering who’s at the door.

Finishing touches

One last prompt makes the tablet look after itself. It turns the screen off at night, dims it in the evening and jumps back to the dashboard every morning:

Using the Kiosk Satellite entities in my Home Assistant, create automations that turn the tablet screen off at 23:30 and on at 06:30, dim it to 30% at sunset and back to 80% at sunrise, and press its "go to dashboard" button every morning. Show me each one before you save it.

A few things I learned along the way:

  • Change one thing at a time. Ask Claude for a preview before it saves anything.
  • Keep a copy of your dashboard file. If something breaks, ask Claude to go back to the last version that worked.
  • Slow Home Assistant box? Keep the dashboard simple. Show camera snapshots and only play live video when you tap.
  • Ask Claude to explain first. That way you say yes to every change before it happens.

What’s next

I’m going to keep tinkering. Next on my list:

  • A proper voice assistant. Like Siri or Alexa, but powered by Claude or ChatGPT so it’s actually smart. That means paying to use their API, so it won’t be free. But it could pull in my apps and emails too.
  • A better stand. I expected silver. It’s this blue, green, grey colour I don’t love.
  • More tablets. One in the hallway, one in the office, all showing the same dashboard.

I don’t even need my computer to make changes. I just ask Claude on my phone for a new widget or automation and it’s done.

Can anyone really do this?

Yes. I thought this would take days, maybe a week. I had it working in two hours.

You don’t need to code or be technical. Home Assistant is the trickiest bit, and even then you can ask Claude or ChatGPT whenever you get stuck. If you’ve been eyeing Apple HomeView but want something bigger, cheaper and fully yours, build your own.

FAQ

Can I build my own Apple HomeView alternative?

Yes. You need an Android tablet, Home Assistant and Claude or ChatGPT to help. A free app called Kiosk Satellite turns the tablet into a smart home display.

What is Home Assistant?

Free software that runs your smart home from one place. It works with thousands of devices from lots of different brands, not just one company’s.

Do I need to know how to code?

No. I didn’t write any code. I told Claude what I wanted and it built it.

How much does it cost?

My tablet was under $200 and Kiosk Satellite is free. You’ll also need something to run Home Assistant on, like a Home Assistant Green or a Raspberry Pi you already own. To connect Claude, Home Assistant needs remote access, which can mean a paid add-on like Home Assistant Cloud.

Can I use an iPad instead?

You can try, but iPads are much more locked down. Android lets you replace the home screen and change everything, so it’s far better for this.

Why LCD and not OLED?

The dashboard stays on all day showing the same thing. That can burn a ghost image into an OLED screen. LCD doesn’t have that problem.

How long does it take?

My first build took about two hours. I reckon a second one would take around 30 minutes.

Can I copy your prompts?

Yes. Every prompt I used is in the steps above. Swap in your own devices and screen size, and send them to Claude one at a time.

Leave a Reply

Your email address will not be published. Required fields are marked *